Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > Happymodel Mobula6 HD 65mm & Spare Parts > Happymodel Mobula6 HD 27g 65mm Crazybee F4 Lite 1S Whoop BNF w/Runcam Split3-lite 1080P HD DVR Camera - Flysky HP600-FL
Happymodel Mobula6 HD 27g 65mm Crazybee F4 Lite 1S Whoop BNF w/Runcam Split3-lite 1080P HD DVR Camera - Flysky HP600-FL
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

Happymodel Mobula6 HD 27g 65mm Crazybee F4 Lite 1S Whoop BNF w/Runcam Split3-lite 1080P HD DVR Camera - Flysky HP600-FL


Add to Compare
RM508.00  
Item details
SKU: HP600-FL
Weight: 250 grams
Stock: Stock available


  Share This   Add To Facebook   Add To MySpace

Happymodel Mobula6 HD 27g 65mm Crazybee F4 Lite 1S Whoop BNF w/Runcam Split3-lite 1080P HD DVR Camera - Flysky HP600-FL

Specifications:

Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless HD whoop only 27g
Come with Runcam Split3-lite 1080P HD DVR
Smooth and agile
Compatible for 1S Lipo/LIHV
Camera Angle adjustable
Size: 80mm*80mm*40mm
Weight: 27g

Receiver:
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

 Spare parts specifications:


 Motor:
Mode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Propellers:
Gemfan 1219-3
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.28g

Flight controller:
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC:
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

Onboard Flysky SPI receiver Version:
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support

Onboard 5.8g VTX:
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
Smartaudio ready

Runcam Split3-Lite:
Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

Lipo Battery:
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0


 Package Included:
 1 x Mobula6 1S 65mm Whoop Drone Frame
 1 x SPI Receiver : Crazybee F4 Lite FC Built-in Flysky SPI RX
4 x EX0802 KV19000 Brushless Motor
 1 x Gemfan 1219-3 Propellers(4cw+4ccw)
 1 x Runcam Split3-lite 1080P HD Camera +DVR
 1 x 5.8G 25mW 40ch VTX (Flight Controller Built-in)
4 x 1S 250mah 30C LiHV Battery
 1 x 1S Lipo/LIHV USB Charger
 1 x Propeller Disassemble Tool

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed