Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > Flight Controller & GPS > iFlight SucceX Mini (20X20) F4 V3 FC 35A Blheli_32 2-6S ESC 5.8G Dual Gyro 500mW Smartaudio VTX SX500-V3
iFlight SucceX Mini (20X20) F4 V3 FC 35A Blheli_32 2-6S ESC 5.8G Dual Gyro 500mW Smartaudio VTX SX500-V3
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

iFlight SucceX Mini (20X20) F4 V3 FC 35A Blheli_32 2-6S ESC 5.8G Dual Gyro 500mW Smartaudio VTX SX500-V3


Add to Compare
RM360.00  
Item details
SKU: SX500-V3
Weight: 100 grams
Stock: Stock available


  Share This   Add To Facebook   Add To MySpace

iFlight SucceX Mini (20X20) F4 V3 FC 35A Blheli_32 2-6S ESC 5.8G Dual Gyro 500mW Smartaudio VTX SX500-V3

PRODUCT DESCRIPTION

The SucceX Mini F4 V3 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 4 uarts With its clean intuitive layout, the SucceX MINI F4 V3 TwinG makes installation a breeze with 10 pin connector that allows simple plug and play connection with your 4in1 ESC and SucceX 500mW VTX.

But the real magic of this flight controller lies in its TWIN GYRO configuration.

The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.

With plenty of processing power and uarts, this is the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect Fc for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.

Features:
* STM32 F405 MCU FC w/OSD, integrated dual IMC20689 accelerometer and gyro;
* Plug-in connection, pin header design, easy to install and disassemble;
* Support current meter;
* BLHeli-32-bit 35A 4-IN 1 ESC
* Super-lightweight(including screws,aluminum column & nuts):
    FC & ESC & VTX:16.4g

SucceX mini F4 V3.0 Flight Controller Specs:
- MCU: 100MHz STM32F405
- IMU:Dual ICM20689 gyro/accelerometer (SPI)
- Integrated LC Filter
- Input Voltage: 2-6S Lipo
- Blackbox:32MB
- Barometer: No
- LED Pad: Yes
- Buzzer Pad: Yes
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC Output: 5V@3A
- Size: 27x27mm board, 20mm mounting holes (M3)
- Uart: 4
- INA pad: n uart2
- Telemetery: Yes
- Current Sensor: Yes
- Softserial: No
- Target: STM32F405 (CLI config necessary; Check SETUP GUIDE above)

SucceX Mini 35A V3.0 2-6S 4 in 1 ESC Specs
- Input:2-6s lipo
- Installing Hole: 20x20mm, M3
- Target:iFlight-BL32-4IN1
- Constant:35Amps
- Burst:45Amps(3 Seconds)
- Dimensions:31*31mm(including the power pads)
- Telemetery: Yes
- Current Sensor: Yes
- BEC: No
- Supports Dshot1200,Proshot,Oneshot,Multishot 

SucceX Mini F4 V3.0  VTX Specs:
- Input voltage: 5-36V DC
- Channel: 48
- Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW / 500mW
- Size (mm): 26 * 26 mm
- Mounting Holes Dimension: 20mm x 20mm(M3)
- Connector type: mmcx Connector
- BEC Output: No
- IRC Tramp protocol

Package included 
- 1 x SucceX mini F4 V3 Flight Controller 
- 1 x SucceX Mini 35A V3 2-6S 4 in 1 ESC
- 1 x Succex Mini VTX  
- Cable Set

Note : SucceX Stack only. NOT including frame.

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed