iFlight SucceX-E F4 V2.1 (30.5x30.5mm) 2-6S FC & 45A BLheli_S ESC & SucceX Force 800mW VTX FPV Stack MX-F845

FC // SucceX-E F4 V2.1 Flight controller

Specs:

- MCU：STM32F405

- Gyro：MPU6000

- Betaflight OSD：YES

- Blackbox：8MB

- 6X Uarts

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX telemetry: YES

- WS2812 led Strip：YES

- Baro: yes BMP280(I2C)

- Beeper：YES

- Input：2-6S（Max 8S）

- BEC：5V / 3A

- Firmware target : BETAFLIGHTF4

- Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm

- Dimensions：36*36mm

- Weight：6.6g

 

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

VTX // SucceX Force 5.8g 800mW VTX Adjustable

- The output power is stable;

- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

- Output 48 channels. 

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V～36V，+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)

- Input voltage: 5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW

- Channel: 48

- size : 36*36*3mm

- PIT/25mW/200mW/400mW/800mW

Features：

1. Double BEC circuit, one is used for flight control power supply and the other is used for LED power supply.
2. With image transmission cable interface.
3. 8MB black box, Built-in OSD.
4. 4-way LED interface, STM32F405 processor.

Package included:

1pc x  SucceX-E F4 V2.1 Flight controller

1pc x 45A 4in1 ESC 

1pc x SucceX-Force 800mW adjustable VTX

1set x Wire harness