Welcome Visitor, you can login or create account.

Home > Products > Multi-Rotors & Parts > Flight Controller & GPS > iFlight SucceX-A AIO F4 Flight Controller 40A Blheli_32 2-6S (30.5x30.5) Compatible DJI Air Unit SX-40A
iFlight SucceX-A AIO F4 Flight Controller 40A Blheli_32 2-6S (30.5x30.5) Compatible DJI Air Unit SX-40A
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

iFlight SucceX-A AIO F4 Flight Controller 40A Blheli_32 2-6S (30.5x30.5) Compatible DJI Air Unit SX-40A


Add to Compare
RM250.00  
Item details
SKU: SX-40A
Weight: 100 grams
Stock: Out of stock


  Share This   Add To Facebook   Add To MySpace

iFlight SucceX-A AIO F4 Flight Controller 40A Blheli_32 2-6S (30.5x30.5) Compatible DJI Air Unit SX-40A

PRODUCT DESCRIPTION
The SucceX-A F4 AIO(F4+40A) NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts,4 motor outputs, 8Mb blackbox and a powerful F4 processor to run it all. Designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the AIO FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

Attention: This AIO-Board was specifically designed to run with a DJI Air Unit and takes advantage of DJI‘s latest Betaflight OSD pass-through! Because of space limitations we needed to take compromises and removed analog OSD support for this board! If you need analog OSD functionality, please check our latest releases.

Top Features:

• DJI Plug-and-Play - No need to solder tiny wires!
• Gyro Fusion - Zero delay Twin-Gyro filtering!
• Dual BEC 5V and 10V

FC // SucceX-A F4 AIO

MCU: 168MHz STM32F405
Gyro:MPU6000
Blackbox:8MB
OSD Chip: NO (Analog OSD not available)
OSD Betaflight: YES (Digital DJI Air Unit pass-through)
BEC: 5V 2.5A (3A MAX) / 10V 2.5A (3A MAX)
Voltage sensor scale: 110
Current sensor scale: 100
Inverter for SBUS input (UART2-RX)
Beeper pad : Yes
RSSI input pad: No
UARTs:5
Motor outputs: 4
8 pin for DJI air unit port (10V,GND,T1,R1,GND,R2I,T2,5V)
BLHeli32 Telemetry:RX4
Input voltage:recommended 2-6S
Target: STM32F405 (CLI config necessary; Check SETUP GUIDE above)
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 40.5*43mm
Weight: 11.4g
USB type-C


ESC // SucceX 40A 2-6S

Top Features:

- 6 layers double-sided PCB board
- 2oz 1.6mm thick power board
- 32bit STM32F051 MCU, 48kHz maximum clock speed
- TDK MLCC Low ESR ceramic capacitors
- Top grade TPN2R304PL MOSFET

Specification:

MCU: STM32F051
Up tp 48kHz PWM frequency
Capacitance: 484uF
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 40A / Burst: 50A
BlHeli32 telemetry: Yes
BEC: No
Supports up to Dshot1200, Proshot, Oneshot, Multishot
Target: iFlight-BL32-4IN1
Mounting pattern: 30.5*30.5mm/Φ3mm
Dimensions: 43*39mm (including the power pads)

Package Includes:

1 X SucceX-A F4 AIO
1 X Capacitor 470uF/50V
1 X XT60 12AWG cable
1 X Wire harness (plug&play) for DJI Air Unit
4 X M4 to M3 silicon grommets

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed