SpeedyBee Adapter 2 Micro USB Adapter 1-6S Support XT60 & PH2.0 Connectors for Betaflight / INAV Configuration XJ381
Brand Name: Speedy Bee
Model: Adapter 2
Item Name: Adapter 1-6S Support XT60 & PH2.0 Battery Connectors
|Power Input Voltage Range
||1-6S(3.8V+ for 1S)
|Power Input Interface
||XT60-Male, PH2.0 male
|Liquid Silicone Cable Length(Pure Wire)
|WiFi Transmission Distance
|Standby Working Current Under 5V
|Maximum Output Current
Upgrade Your Flight Controller VIA APP!
The WiFi chip in the Adapter 2 which greatly improves the transmission speed and makes it possible to upgrade your flight controllers The whole upgrading process costs only 2-3 minutes.
The firmware flashing currently only supports Betaflight via WiFi connection to the Adapter 2.
Full-Featured BF/INAV Configuration.
Now the SpeedyBee Adapter 2 is a full-featured mobile BF/iNav configurator.
Just go to the field to fly without carrying a heavy laptop.
Power The Whole Thing With One Battery.
Soldering work should be done on the user end on the previous generation. But the Adapter 2 now has built-in XT60 and PH2.0 connectors which both support 1-6S LiPo batteries input*.
As the Adapter 2can power your flight controller, you don't need another battery to power your quad. *For 1S batteries, 3.8V or above is requried.
Because some(very few) quadcopters may consume a lot of current, and the output voltage of the adapter 2 will be greatly reduced.
1x Adapter 2