Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > Happymodel Mobula7 HD & Spare Parts > Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V2.0 BNF w/ CADDX Turtle V2 HD Cam - Frsky NON-EU Receiver XJ295
Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V2.0 BNF w/ CADDX Turtle V2 HD Cam - Frsky NON-EU Receiver XJ295
enlarge

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V2.0 BNF w/ CADDX Turtle V2 HD Cam - Frsky NON-EU Receiver XJ295


Add to Compare
RM590.00  
Item details
SKU: XJ295
Weight: 300 grams
Stock: Stock available


  Share This   Add To Facebook   Add To MySpace

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro V2.0 BNF w/ CADDX Turtle V2 HD Cam - Frsky NON-EU Receiver XJ295

Specification: 
Brand Name: Happymodel
Model: Mobula7 HD
Item Name: 75mm Wheelbase 2-3S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Receiver:  Compatible Frsky NON-EU Receiver
Size: 98mm*98mm*45mm

Weight: 46.7g (without battery)
             69.3g ( with battery )

Crazybee F4 PRO V2.0 Flight Controller
Item Name: Crazybee F4 Pro V2 FC
MCU:  STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver,
                            without receiver version doesn't have rx)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection

Firmware
(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR
Onboard 5A 4 In 1 ESC

MCU upgraded to EFM8BB21
Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
 
Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

Onboard DSM2 / DSMX receiver version

Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
EX1102 9000KV Motor
Model: EX1102
KV: 9000KV
Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 2.7g
Support 1-3S Lipo
 
Propeller
40mm 4-blade Propeller ( 4 CW + 4 CCW)
 
5.8G 40CH 25-200mW VTX
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g
CADDX Turtle V2 Camera
 

Image sensor: 1/2.7" CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
Power Input: DC 4.5-20V
FPV FOV: 155°
Recording FOV: 170°
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Lens: 1.8mm Turbo Eye Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MP4
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
Color: Red
 
Lipo Battery
Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 23g
Connector: XT30

Features:

- New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible
- 2S for indoor Cine whoop mode
- 3S for outdoor Freestyle whoop mode 
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- The lightest 1102 brushless motor only 2.7g with double ball bearings 
- Powerful and smoothly 
- Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
- Caddx turtle v2 + 1080p 60fps DVR ready
- Camera Angle adjustable
- VTX power switchable 25mw~200mw
- Smartaudio ready , change VTX bands, powers, channels via OSD 
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
- Full telemetry function ready (Frsky Non-EU and Flysky version support)
- Special Breath light ready
- Real Bind and Fly version
- Compatible both for 2s-3s Lipo/LIHV

Package Included:
1x Mobula7 HD 75mm FPV Drone
4x 40mm 4-Blade Propellers ( 2 CW & 2 CCW)
1x 3S 11.4v 300mah 30C/60C battery
1x Propeller Disassemble Tool
1x Screwdriver
1x OSD Menu Board
1x XT30 to 2S Whoop Cable Pigtail PH2.0

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed