Welcome Visitor, you can login or create account.

Follow Us On
Home > Products > Multi-Rotors & Parts > Happymodel Larva X HD & Spare Parts > Happymodel Larva X HD 125mm F4 2-3S Toothpick And Whoop 2in1 BNF w/ Caddx Baby Turtle - Frsky HP110-FR
Happymodel Larva X HD 125mm F4 2-3S Toothpick And Whoop 2in1 BNF w/ Caddx Baby Turtle - Frsky HP110-FR
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

Happymodel Larva X HD 125mm F4 2-3S Toothpick And Whoop 2in1 BNF w/ Caddx Baby Turtle - Frsky HP110-FR

Add to Compare
Item details
Weight: 500 grams
Stock: Stock available

  Share This   Add To Facebook   Add To MySpace

Happymodel Larva X HD 125mm F4 2-3S Toothpick And Whoop 2in1 BNF w/Caddx Baby Turtle - Frsky HP110-FR


  • Toothpick HD and Whoop HD 2 in 1 combo (Default Comes in Toothpick HD style)
  • Toothpick style compatible both 2.5inch or 3inch propellers
  • New design EX1203 High efficiency brushless motors
  • Caddx baby Turtle provide 1080P 60FPS DVR video
  • Camera Angle adjustable
  • Full range receiver options
  • Buzzer ready
  • Smooth and powerful
  • Compatible both for 2s-3s Lipo/LIHV


  • Wheelbase: 125mm
  • Size: 105mm*105mm*35mm(without propellers)
  • Weight: Toothpick style ductless 63g (without battery)
  • Whoopick style ducted 79g (without battery)


  • Mode: EX1203 KV6200
  • Configuration:9N12P
  • Stator Diamter:12mm
  • Stator Length:3mm
  • Shaft Diameter:Φ1.5mm
  • Motor Dimension(Dia.*Len):Φ15mm*15mm
  • Weight(g):4.7g
  • No.of Cells(Lipo):2S-3S

Flight Controller

  • (Frsky SPI RX version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • (Flysky SPI RX version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
  • (External RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Could add external receiver on the FC board
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection


  • Blades:2
  • Material:PC
  • Prop Disk Diameter:65mm
  • Center Thickness:5mm
  • Center Hole Inner diameter:1.5mm
  • Max Prop Width:8mm
  • Weight:0.3g

Onboard 4in1

  • ESC MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Current: 10A continuous peak 12A (5 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_7.HEX
  • Default protocol: DSHOT600


  • Output power: 25~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Antenna: Micro UXII Antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race bandSmartaudio ready
  • Weight: 3g

Caddx Baby Turtle

  • TV system: NTSC/PAL changeable
  • Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
  • Power Input: DC 4.5-20V
  • Mini Illumination: 0.01lux
  • Image Resolution: 2 Megapixels
  • Working Current: 380mA@5V/160mA@12V (low consumption)
  • OSD Menu: Yes (Support Voltage Display)
  • Video Files: MP4
  • Audio: Support
  • Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
  • S/N Ratio: >60dB (AGC OFF)
  • Video Output: CVBS
  • Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Lipo Battery

  • Capacity:450mAh
  • Voltage:11.4v
  • Continuous Discharge Rate: 75C
  • Size: 66mmx21mmx18mm
  • Weight: 42g
  • Connector: XT30


  • 1x Larva-X HD frame (with Toothpick style canopy and Whoop style canopy) 
  • 4x Whoop duct for Larva-X HD 
  • 4x EX1203 KV6200 Brushless Motors
  • 1x Propeller Set 
  • 1x CADDX Baby Turtle
  • 1x VTX 5.8g 25mw~200mw 
  • 2x 3S 11.1v 450mah 75c LiPo Battery
  • 1x 5.8g Micro UXII antenna
  • 1x Propeller disassemble tool

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed