Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > Flight Controller & GPS > Happymodel Crazybee F4 Pro V3.0 2-4S Brushless Flight Control Built-in 10A Blheli_S 4IN1 5V/1A BEC Frsky Receiver HP117
Happymodel Crazybee F4 Pro V3.0 2-4S Brushless Flight Control Built-in 10A Blheli_S 4IN1 5V/1A BEC Frsky Receiver HP117
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

Happymodel Crazybee F4 Pro V3.0 2-4S Brushless Flight Control Built-in 10A Blheli_S 4IN1 5V/1A BEC Frsky Receiver HP117


Add to Compare
RM175.00  
Item details
SKU: HP117
Weight: 50 grams
Stock: Stock available


  Share This   Add To Facebook   Add To MySpace

Happymodel Crazybee F4 Pro V3.0 2-4S Brushless Flight Control Built-in 10A Blheli_S 4IN1 5V/1A BEC Frsky Receiver HP117

Specification:

(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600

SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Failsafe support
No RX version support external serial-bus receiver like XM+, crossfire, S-FHSS etc.

Recommend Battery: 2S 450mah/550mah , 3S 300mah/350mah/450mah, 4S 300mah/350mah

Notes: If used 3inch propellers, we recommend use 2-3S only

Package Included:
1 x Crazybee F4 Pro V3.0 board Frsky

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed