Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > BetaFPV & Spare Parts > BetaFPV HX100 SE 100mm FPV 1S M01 AIO Camera VTX F4 V2.1 BNF - FrSky Receiver HX100 SE
BetaFPV HX100 SE 100mm FPV 1S M01 AIO Camera VTX F4 V2.1 BNF - FrSky Receiver HX100 SE
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

BetaFPV HX100 SE 100mm FPV 1S M01 AIO Camera VTX F4 V2.1 BNF - FrSky Receiver HX100 SE


Add to Compare
RM439.00  
Item details
SKU: HX100 SE
Weight: 230 grams
Stock: Stock available


  Share This   Add To Facebook   Add To MySpace

BetaFPV HX100 SE 100mm FPV 1S M01 AIO Camera VTX F4 V2.1 BNF - FrSky Receiver HX100 SE

BULLET POINT

  • Uses the lightest F4 1S Brushless FC V2.1 motor, which weighs 2.69g
    without a cable. This FC has the efficient STM32F411CEU6 processor
    and tuned Betaflight MATEKF411RX (MK41R), which allow for
    maximum weight savings
  • Equipped with BetaFPV’s exclusively designed BT2.0 connector, it can
    support 9A continuous current and 15A burst while the PH2.0 connector
    uses 4.5A continuous current
  • The highly efficient combination of the light 1102 13500KV motor and
    durable 65mm 2- blade props deliver a drone with excellent flight
    performance and achieves a great noise-reducing function.
  • The drone comes with BT2.0 - PH2.0 adapter cable in default, which is convenient for customer who uses PH2.0. We also released the BT2.0 tester and charger, its charging current has been upgraded from 0.5A to
    1A, which makes the charging speed 2 times faster.

SPECIFICATION

  • Item: HX100 SE FPV Quad
  • Weight: 28.09g (without battery)
  • FC&ESC: F4 1S Brushless Flight Controller V2.1
  • Motors: 1102 13500KV Motors
  • Props: Gemfan 65mm 2-blade props(1.5mm shatf hole
  • Camera & VTX :M01 AIO Camera VTX
  • Frame: HX100 SE Carbon Fiber Frame
  • Canopy: Canopy for Hx100 SE
  • Receiver Option: Frsky XM
  • Battery: BT2.0 300mah 1S Battery
  • Flight time: 4 mins in a smooth outdoor flight, 2:30 mins in full throttle outdoor flight

FLIGHT CONTROLLER

F4 1S Brushless Flight Controller V2.1- The lightest 1S brushless FC in the current market. With slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness. 

FC

  • CPU: STM32F411CEU6 ( 100MHZ )
  • Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
  • Size: 29mm x 29mm, fully compatible with the whoop frame in the current market.
  • Firmware version: Betaflight MATEKF411RX (MK41R) 
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Power Cable: 60mm, with BT2.0 connector, 1.25mm motor header pins

ESC

  • Power supply: 1S
  • Current: 5A continuous and peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_6.HEX
  • Signal Support: D-shot150,300,600, Oneshot125, Multishot, PWM

CAMERA & VTX

The M01 AIO Camera is a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna. It has both a fast response and a clear image.

What's more, the M01 vtx board is super light and perfectly suited for the
HX100 SE canopy. The Quad comes with a 25° and 35° camera tilt
mounts, the 35° mount is suitable for high-speed flight, while the 25° mount
is for lower speed flight. SmartAudio is supported.

  • Output power: 25mW
  • TVL: 600TVL 
  • FOV: H:120°/V:100°
  • Video System: NTSC
  • Horizontal Resolution: 640X480 1/4”
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz

PACKAGE INCLUDES:

1 x HX100 Brushless Whoop Quadcopter (1S)

1 x 300mAh 1S 30C Battery with BT2.0 connector

1 x BT2.0-PH2.0 Adapter cable

1 x Spare camera mount with 25° tilt

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed