Welcome Visitor, you can login or create account.



Follow Us On
Home > Products > Multi-Rotors & Parts > BetaFPV & Spare Parts > Beta85X 4K 4S Whoop Caddx Tarsier 4K Camera F4 V2 OSD 25 / 200mW VTX BNF - FrSky Receiver XJ319
Beta85X 4K 4S Whoop Caddx Tarsier 4K Camera F4 V2 OSD 25 / 200mW VTX BNF - FrSky Receiver XJ319
enlarge
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL
  • NULL

Beta85X 4K 4S Whoop Caddx Tarsier 4K Camera F4 V2 OSD 25 / 200mW VTX BNF - FrSky Receiver XJ319


Add to Compare
RM1,060.00  
Item details
SKU: XJ319
Weight: 320 grams
Stock: Out of stock


  Share This   Add To Facebook   Add To MySpace

Beta85X 4K 4S Whoop Caddx Tarsier 4K Camera F4 V2 OSD 25 / 200mW VTX BNF - FrSky Receiver XJ319

BETA85X SPECIFICATIONS

  • Weight: 88.6g (without battery)
  • F405 V2 Flight Controller and 16A BLHeli 32 ESC
  • Motors: 1105 5000KV with connerctor
  • Props: 2" 4-Blades Props
  • Camera: CADDX Tarsier 4K
  • Canopy: Canopy for Tarsier 4K camera
  • Receiver : Frsky XM+
  • Recommend battery: 4S 450mah battery (Not including)
  • 5.8G FPV antenna

FC SPECIFICATIONS

Find more details about this F405 V2 FC in another page.

  • CPU: STM32F405 (Overclock to 240MHz)
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD (OBSD)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

Find more details about this BLHeli 32 ESC board in another page.

  • Support BLHELI_32
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
  • Input voltage: 3-4S lipo
  • Cotinue current: 16A
  • Peak current: 19A 
  • Firmware target: BETAFPV-16A-32bit
  • MCU: STM32F051K66

CAMERA SPECIFICATIONS

Find more details about this Caddx Tarsier 4K camera in another page.

  • Weight: 19.5g
  • FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
  • Lens: Dual lens 2.8 / 12Mega
  • Image Sensor: 12M SONY sensor
  • TV System: NTSC / PAL, can be changed
  • Anti-Shake: Hardware anti-shake
  • Scene Mode: Auto / Personage / Scenery / Defog
  • Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
  • Horizontal Resolution: 1200TVL
  • Image: 16:9 / 4: 3 (changeable)
  • Camera OSD: Seperate OSD
  • The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.

BULLET POINT

  • F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
  • High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable. 
  • Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board. 
  • Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
  • Installed with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P.
  • Upgraded 1105 motor from 6000KV to 5000KV,  with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
  • Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
  • 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

Package Includes:

1x Beta85X 4K 4S Whoop Caddx Tarsier 4K Camera FPV Racing Drone

1x ND8 Fliter for Tarsier 4K camera

1x OSD Menu Board

Copyright © 2013 RC HOPEZ   |   e-commerce by webShaper™  
Terms   |   Return & Refund Policy   |   Great Deals via RSS Feed