TAROT-S version of a newly developed multi-functional non-aileron ZYX precision high-performance three-axis gyroscope system Flybarless System currently on the market the most lightweight, applies to all 200-700 level of engine or electric helicopter support market all the
90 degrees, 120 degrees, 135 degrees, 140 degrees CCPM swashplate system, compatible with all commercially available servos, support firmware upgrade service.
The debugging process is simple and easy, the whole debugging process only takes ten minutes.
ZYX three-axis gyroscope system provides five different modes of flight options, corresponding to different control feel to meet the beginner to advanced players, with excellent handling feel. The ZYX three-axis gyroscope system has extensive commissioning project, adjust the swashplate and tail server all set parameters, allowing the player to feel Flybarless Helicopter flight shocking.
The ZYX precision high-performance three-axis gyroscope system uses a high-profile gyro sensor, and applies to all kinds of harsh climatic conditions, precise control of the helicopter flight status. Built-in spin to optimize the correction, the spin angular rate is fairly stable. When the roll of the helicopter spin, the machine realize stable in a rotatory roll will not be offset phenomenon occurs, showing the perfection of the origin of roll attitude.
ZYX is-S 3-axis gyroscopes and ZYX is 3.0 debugging software, new features:
1: ZYX is-S new DSM2, DSMJ, satellite receiver connectivity.
2: ZYX is-S version of the new Futaba S-Bus, the receiver-line connection.
3: ZYX is-S version adds the use of DSM2 DSMJ satellite receiver out of control protection functions, the user can set the throttle and pitch out of control to protect the value.
4: ZYX is-S version added four kinds of aircraft configuration: cross-shaped four-rotor aircraft, the X-type four-rotor aircraft, conventional fixed-wing aircraft (enhanced 3D and crane), delta-wing fixed-wing aircraft.
5: ZYX is-S version can use the USB data cable and computer connection, supporting computer software version of ZYX is 3.0, ZYX is-S programmer can use to set parameters.
: ZYX is 3.0 the new increase in parameter interpretation, the mouse on the parameters to display the parameters explained.
The ZYX is-S and ZYX is 3.0 's new function:
1: The ZYX-S add DSM2 and DSMJ satellite receiver support function.
2: The ZYX is-S-S-Bus, the add Futaba receiver support function.
3: The ZYX-S add failsafe function when using DSM2 and DSMJ satellite receiver,
user can set the failsafe values for throttle and collective pitch.
4: The ZYX-S add four aircraft configrations: '+' quadrotor, 'X' quadrotor,
conventional airplane (enhance hover and 3D flight), delta airplane.
5: The ZYX is-S can use the USB adapter to connect to the PC, the new PC software and is
ZYX is 3.0. It can be setup by the ZYX is multifunctional gyro programmer's.
6: The ZYX is 3.0 of the add parameter explanation function, put the mouse on the parameter
the explanation. will be 4 shown.
ZYX is-S version of three-axis gyroscope specifications size: 37.2mm * 25.2mm * 13mm
Weight: 9.8g (excluding cable and plug)
Operating voltage: DC 3.5V-9V
Operating current: 60 mA
Operating temperature: -15 ℃ ~ 65 ℃
Maximum angular rate: 800 ° / sec to support the rudder servo: analog servos 1.52ms, 1.52ms digital servos, 760us digital servos, 960us digital servo support Swashplate servo: 1.52ms analog servos, the 1.52ms digital rudder native support for remote devices: PPM, PCM, 2.4G
Support firmware upgrade to support multi-paddle rotor head, cross-shaped four-rotor aircraft, the X-type four-rotor aircraft, conventional fixed-wing aircraft (enhanced 3D
And crane functions), delta-wing fixed-wing aircraft.
ZYX three-axis gyroscope * 1
Signal line * 3
Note paper * 1
The gyroscope shock paste * 5
ZYX is S DSM2/DSMJ satellite receiver cable [optional]
ZYX is-S Futaba S-Bus, receiver cable [optional]